Replacement Foam Cushions


When weaving with Shaker Chair Tape, the space between the upper and lower layers of tape is stuffed with a firm foam rubber cushion (the Shakers used horsehair or other materials), not only for comfort, but also to maintain contact between the two layers so that the lower layer helps support the weight which would otherwise be carried only by the upper layer of tape. This prevents sagging and reduces wear.

Mid-way through the weaving process, the weaver slides the foam cushion into the space between the upper and lower layers of warp. Trim the cushion to size with scissors, if necessary. To prevent the corners from showing once the seat is completed, trim off a small triangle (1" or so) from each corner.

For a firm and comfortable seat cushion, we use a urethane foam with a density of 1.8 pcf, a compression of 40-50 IFD, and is an "FR" type, which means that it is fire-retardant and meets the requirements of California Technical Bulletin No. 117. Made in USA.

Click here to order Shaker Chair Tape.

WARNING: All urethane foams including "FR" types will burn.
Do not expose to any flame source or high temperature ignition source, such as cigarettes, space heaters, or naked light bulbs. Once ignited, urethane foams can produce rapid flame spread, intense heat, dense smoke, and toxic gases causing death.

Stock #
Foam Seat Cushion, No. 1 Size
12" (front) x 10" (depth) x 1" thick
Foam Seat Cushion, No. 3 Size
16" (front) x 12" (depth) x 1" thick
Foam Seat Cushion, No. 5 Size
18" (front) x 14 1/2" (depth) x 1" thick
Foam Seat Cushion, No. 7 Size
19" (front) x 16" (depth) x 1" thick
Foam Cushion for Foot Stool
7" x 10" x 1" thick
Foam Back Cushion, No. 5 Size
10" x 13 1/2" x 1" thick
Foam Back Cushion, No. 7 Size
12" x 16" X 1" thick
Foam Seat Cushion for Mt. Lebanon Settee
40" (front) x 16" (depth) x 1 1/4" thick
Foam Back Cushion for Mt. Lebanon Settee
13" x 32" x 1 1/4" thick
Foam Seat Cushion for Mt. Lebanon Bench
32 1/2" (front) x 13 1/2 (side) x 1 1/4" thick